Macroscopic and microscopic electrical properties of a ferrofluid in a low frequency field

Using the complex dielectric permittivity measurements, in the frequency range 20 Hz – 2 MHz and at temperatures between (25–70) ^∘C, the polarizability (α), the electric modulus (M) and the electrical conductivity (σ), of a ferrofluid sample, were determined. The results enabled the computation of the thermal activation energy of electrical conduction, the obtained value being approximately equal, at 0.15 eV. By eliminating the losses arising from electrical conduction, we highlighted the existence of a Schwarz type dielectric relaxation, in the sample, at the frequency above 5 kHz. These results allowed, for the first time, the evaluation of the mechanical mobility, u, of the ions on the particle surface, resulting in a value of, $u=3.4\cdot {10}^8$ m/s N. Knowledge of macroscopic and microscopic electrical properties is useful in explaining the dielectric polarization mechanisms and relaxation processes of ferrofluids, and also in the use of ferrofluids in technological and biomedical applications.     

基于改进克隆选择算法的统一混沌系统同步控制与参数辨识

提出一种改进的克隆选择算法用于解决混沌系统的参数辨识问题.该算法利用抗体的高频变异和受体编辑两种机制有效平衡算法的全局探索与局部开发，并引入向精英抗体学习策略进一步提高算法的收敛质量.对10个优化问题的实验表明：所提出算法在求解精度、收敛速度以及稳定性方面具有更好的性能.以参数未知统一混沌系统的同步控制为研究对象，合理设计同步控制器，并对同步系统的稳定性进行理论分析.通过对同步比例因子的设置，实现统一混沌系统的完全同步、反同步、投影同步等多种同步方式.仿真实验结果表明该方法能够实现对未知系统参数的精确辨识以及驱动-响应系统的有效同步控制，验证了所提方法的可行性与有效性.     

约束Fractional Tikhonov正则化的模迭代方法

反问题是现在数学物理研究中的一个热点问题,而反问题求解面临的一个本质性困难是不适定性。求解不适定问题的普遍方法是:用与原不适定问题相“邻近”的适定问题的解去逼近原问题的解,这种方法称为正则化方法.如何建立有效的正则化方法是反问题领域中不适定问题研究的重要内容.当前,最为流行的正则化方法有基于变分原理的Tikhonov正则化及其改进方法,此类方法是求解不适定问题的较为有效的方法,在各类反问题的研究中被广泛采用,并得到深入研究.     

Local process-dependent structural and mechanical properties of extrusion blow molded high-density polyethylene hollow parts

Although applied for several decades, production of hollow plastic parts by extrusion blow molding (EBM) is still over-dimensioned. To overcome this issue, a thorough investigation of the process-structure-property relationship is required. In this study, the local process-structure-property relationship for high-density polyethylene EBM containers is analyzed with differential scanning calorimetry and dynamic mechanic analysis microindentation. Local process-dependent crystallinity and complex modulus data at various processing conditions are supplemented with wide-angle X-ray diffraction and transmission electron microscopy (TEM). The crystallinities and the complex moduli clearly show lower values close to the mold side than at the inner side and the middle of the cross-section, which reflects the temperature gradient during processing. Additionally, the orientation of the polymer chain (c-axis) reveals a low level of biaxiality with a slight tendency towards transverse direction. The biaxiality increases for low mold temperature and high draw ratio. Finally, biaxiality is confirmed with TEM, which reveals no preferred lamellar orientation.     

Strain induced strengthening of soft thermoplastic polyurethanes under cyclic deformation

We investigate the cyclic mechanical behavior in uniaxial tension of three different commercial thermoplastic polyurethane elastomers (TPU) often considered as a sustainable replacement for common filled elastomers. All TPU have similar hard segment contents and linear moduli but sensibly different large strain properties as shown by X-ray analysis. Despite these differences, we found a stiffening effect after conditioning in step cyclic loading which greatly differs from the common softening (also referred as Mullins effect) observed in chemically crosslinked filled rubbers. We propose that this self-reinforcement is related to the fragmentation of hard domains, naturally present in TPU, in smaller but more numerous sub-units that may act as new physical crosslinking points. The proposed stiffening mechanism is not dissimilar to the strain-induced crystallization observed in stretched natural rubber, but it presents a persistent nature. In particular, it may cause a local reinforcement where an inhomogeneous strain field is present, as is the case of a crack propagating in cyclic fatigue, providing a potential explanation for the well-known toughness and wear resistance of TPU.     

基于应变梯度理论的微尺度蜂窝等效模量计算方法

本文提出了一种新的能够计及尺度效应的微纳米蜂窝等效模量的计算方法。将一种单参数应变梯度理论引入到本构方程当中,并基于能量等效原理推导了蜂窝面内等效模量地计算公式。算例分析表明,本文方法能够有效地计及尺度效应对蜂窝等效模量的影响。尺度效应与胞壁厚度和长度的值都有关,当胞壁厚度较小时,尺度效应显著,本文方法预测的模量会明显高于传统方法;而当胞壁厚度较大时,尺度效应变得微弱乃至可以忽略不计。但如果胞壁的长度/厚度比很大,则面内等效模量会趋近于0,此时是否考虑尺度效应意义不大。     

Controlling thermomechanical behavior of semicrystalline hydrogenated polynorbornene through the cis- to trans-cyclopentylene ratio

Though polynorbornene synthesized by ring-opening metathesis polymerization has an intrinsically all-cis configuration of the cyclopentylene backbone rings, a fraction of these rings can be epimerized to the trans configuration during hydrogenation over suitable catalysts. By varying the method of hydrogenation, semicrystalline hydrogenated polynorbornenes (hPNs) with trans levels between 0 and 36% were obtained. With increasing trans content, the glass transition temperature, melting point, and enthalpy of melting decrease modestly. By contrast, the temperature at which the hPN crystal transitions into a rotationally disordered polymorph varies strongly with trans content, ranging from 126 °C (all-cis) to 71 °C at 27% trans; at trans contents of 34% and above, no rotationally-ordered phase is observed at any temperature. The room-temperature Young's modulus shows no dependence on trans content, while the yield stress drops by 20% at 1% trans content and slowly decreases further with additional epimerization. The temperature dependence of the Young's modulus differs for trans-containing versus all-cis polymers, while the temperature dependence of the yield stress is set by the polymorph type (rotationally ordered vs. disordered).     

Comonotone approximation with interpolation at the ends on an interval

Let a function f ∈ C[-1, 1], changes its monotonisity at the finite collection Y := {y1,… ,ys} of s points yi ∈ (-1, 1). For each n ≥ N(Y), we construct an algebraic polynomial Pn, of degree ≤ n, which is comonotone with f, that is changes its monotonisity at the same points yi as f, and |f(x)-Pn(x)|≤c(s)ω2(f,(√1-x2)/n), x∈[-1,1],where N(Y) is a constant depending only on Y, c(s) is a constant depending only on s and ω2 (f, t) is the second modulus of smoothness of f.     

环烷酸对油水界面膜流变性质的影响研究

研究了环烷酸对油水界面膜界面张力、弹性模量、损耗模量以及界面膜破裂速率常数的影响,同时对环烷酸与沥青质之间的相互作用进行了测定。结果表明,环烷酸使得原油油水界面张力下降;弹性模量随着环烷酸加量以及振荡频率的增加都分别逐渐增大,并且最终都趋于平衡;在任何振荡频率值时,损耗模量都随着环烷酸加量先增大后减小;当环烷酸加量增加时,界面膜破裂速率常数降低。环烷酸与沥青质之间存在相互作用,随着环烷酸加量的增加,其对沥青质界面膜弹性模量的影响与对原油界面膜弹性模量的影响相似,表明环烷酸主要是通过与沥青质相互作用而促进乳状液稳定性的。     

Synthesis and performances for treating oily wastewater produced from polymer flooding of new demulsifiers based on polyoxyalkylated N,N‐dimethylethanolamine

Usually, oily wastewater produced from polymer flooding (OWPF) was treated by cationic polymer in oilfield. In this paper, six block copolymers of ethylene oxide and propylene oxide were prepared by using N,N‐dimethylethanolamine (DMEA) as the acceptor (DMEA‐mnp and DMEA‐mnpq, n:m:p:q represented the weight ratio of different blocks). Most of DMEA products could perform well for treating OWPF, especially DMEA1231. Their performances were mainly affected by temperature. The reason of increasing oil removal performance of DMEA1231 with temperature was the decrease of interfacial dilational modulus (ε) with increasing temperature. When temperature raised up to 55°C, the ε of DMEA1231 had the minimum (1.5 l mN/m). Therefore, the OiW had the minimum (90 mg/l). Because DMEA1231 had the best performance, its flocculation kinetics was studied systemically. The results showed that the optimum condition for DMEA1231 was as follows: dosage was 300 mg/l, temperature was 55°C, stirring speed was 200 rpm and stirring time was 5 min. At last, the offshore oil field test was carried out to check the DMEA1231 performance. The result showed that at the optimum condition, DMEA1231 could perform as well as the cationic polymer. The most important thing was that flocs of DMEA1231 were not viscous and floated on the surface of the water. The results obtained by this paper provide a good choice for the treatment of OWPF in offshore oilfield to avoid the formation of viscous flocs. Copyright © 2014 John Wiley & Sons, Ltd.